SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Part
Used Forklift Parts - Sooner or later, forklift components will wear and must be replaced. Purchasing new parts could become a pricey venture so another idea is to obtain used forklift components. This can save a lot of cash in the long run. It is a great idea to acquire used forklift components which have been reproduced. These components would ensure that you are getting parts which would work for a long time and be productive.
Remanufacturing worn out or broken components is a more cost effective way overall than rebuilding. With rebuilding parts, just the components which are worn out or broken get changed, which means that other wearable components could break down soon after purchase.
Remanufacturing on the other hand provides the best assurance for used parts. Reproduced components are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is one more rationale why reproduced parts on the whole function so much better. Whichever part within the part is brand new and this offers far longer life to the used part. Depending on the forklift components that are being redone, the cleaning process and the entire remanufacturing process will vary.
After complete disassembly, the engines are oven cleaned. Different components of the engine like for instance spark plugs, pistons, rings, filters, valves, and valve springs can be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A comprehensive examination is done so as to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts utilized on transmission parts meet OEM specifications.
Some components like for instance the alternator, the water pump, torque converters, steer axles and the starter can get longer serviceability after being remanufactured and having all wearable components replaced. The electronic control in the electric forklift is maintained by the control card. This card could likewise be remanufactured with replacing all aged and worn out components. Unlike several forklift components the control card can only have the worn and aged parts replaced.
Components which are remanufactured have to be meticulously inspected upon reassembly to ensure they are in good condition prior to being sold. When acquiring these parts, it is a good idea to be certain that they have undergone all of the proper testing and inspections. On certain larger components like for instance engines, transmissions and steer axles, OEM specification replacement parts should be utilized.
The dealer of used forklifts and components could ensure that the reproduced components have met OEM specifications and that these parts meet industry standards. Lots of details go into remanufacturing used components. This attention to detail provides more serviceability out of remanufactured components opposed to the parts that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Oklahoma City, Oklahoma
forkliftpartsoklahomacity.com
Email Us
About Us